All PRODUCTS

- Auto-ranging for ease of use.
- Phase rotation indication: Displays clockwise and counterclockwise rotation.
- Voltage, resistance, current, continuity, and diode measurement.
- Capacitance measurement: Up to 40,000μF (40.00mF).
- Resistance measurement: Up to 200MΩ.
- Frequency measurement: Up to 40MHz.
- Data hold function to freeze readings.
- Over-range indication and low battery detection.
- Auto power-off after 15 minutes.
- Convenient stand for viewing.
- Safety standard: EN 61010-1 CAT III 600V.
Measurement Ranges:
- DC Voltage: 400mV / 4V / 40V / 400V / 1000V.
- AC Voltage: 400mV / 4V / 40V / 400V / 750V.
- DC/AC Current: 400μA / 4000μA / 40mA / 400mA.
- Resistance: 40Ω / 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ / 200MΩ.
- Capacitance: 4nF / 40nF / 400nF / 4μF / 40μF / 400μF / 4mF / 40mF.
- Frequency: 400Hz / 4kHz / 40kHz / 400kHz / 4MHz / 40MHz.
- Phase Rotation: 8080Hz.

- Auto-ranging for ease of use.
- Voltage, resistance, current, continuity, and diode measurement.
- Capacitance measurement: Up to 4000μF.
- Resistance measurement: Up to 40MΩ.
- Frequency measurement: Up to 100kHz.
- Data hold function to freeze readings.
- Over-range indication and low battery detection.
- Auto power-off after 15 minutes.
- Compact and lightweight design for portability.
- Safety standard: EN 61010-1 CAT III 600V.
Measurement Ranges:
- DC Voltage: 400mV / 4V / 40V / 400V / 1000V.
- AC Voltage: 400mV / 4V / 40V / 400V / 750V.
- DC/AC Current: 400μA / 4000μA / 40mA / 400mA.
- Resistance: 400Ω / 4kΩ / 40kΩ / 400kΩ / 4MΩ / 40MΩ.
- Capacitance: 4nF / 40nF / 400nF / 4μF / 40μF / 400μF / 4mF.
- Frequency: 4kHz / 40kHz / 100kHz.
- Continuity Test: Buzzer sounds when resistance is below 25Ω.

- DC Voltage Measurement: Up to 1500V, suitable for solar applications.
- AC Voltage Measurement: Up to 750V.
- Microampere and milliampere measurement: 600.0 µA ~ 6000 µA, 60.00 mA ~ 600.0 mA.
- Resistance Measurement: 600.0 Ω ~ 60.00 MΩ.
- Capacitance Measurement: 6.000 nF ~ 60.00 mF.
- Frequency Measurement: 6.000 kHz ~ 100.0 kHz.
- Diode and Continuity Testing.
- VAHz function for voltage and current analysis.
- Range change function for flexible measurement.
- Data hold and auto power-off.
- Low battery indication.
- IP65 protection rating for durability.
- Safety Standards: IEC / EN 61010-1 CAT III 1000V, CAT IV 600V.

- Easy-to-read 3-color scale for mistake-proof reading.
- Mirror scale to reduce parallax errors.
- Safety fused on all ranges for protection.
- Diode-protected meter to prevent damage due to overload.
- hFE and dB measurement for transistor testing.
- Built-in stand for convenient reading and measuring.
- Safety "OFF" position to enhance protection.
Measurement Ranges:
- DC Voltage: 0.1V / 0.5V / 2.5V / 10V / 50V / 250V / 1000V.
- AC Voltage: 10V / 50V / 250V / 1000V.
- DC Current: 50μA / 2.5mA / 25mA / 250mA.
- Resistance: 2kΩ / 20kΩ / 200kΩ / 2MΩ / 20MΩ.
- dB Measurement: -10dB to +22dB.
- hFE Measurement: 0-1000.
- ICEO Measurement: 150μA / 1.5mA / 15mA / 150mA.
Specifications:
- Dimensions: 100mm × 150mm × 41mm.
- Weight: Approx. 300g (including battery).
- Power Source: 1.5V (AA) × 2, 9V (6F22) × 1.
- Safety Standard: EN 61010-1 CAT II 1000V.

- True RMS measurement for accurate readings.
- Pocket-sized design for portability.
- 4000-count display for precise measurements.
- Automatic measurement selection (voltage, current, resistance).
- Data hold function to freeze readings.
- Continuity check and diode testing.
- Low battery indication and auto power-off.
- Flashlight function (auto-off after 1 minute).

- True RMS measurement for accurate readings.
- Pocket-sized design for portability.
- 4000-count display for precise measurements.
- Automatic measurement selection (voltage, current, resistance).
- Data hold function to freeze readings.
- Continuity check and diode testing.
- Low battery indication and auto power-off.
- Flashlight function (auto-off after 1 minute).

- AC Current Ranges:
- 200mA (0~199.9mA) ±(1.5%rdg+2dgt)
- 2A (019.99A), 200A (0~199.9A) ±(2.0%rdg+2dgt)
- 0-500A ±(2.0%rdg+2dgt), 501-1000A ±5.5%rdg
- AC/DC Voltage Ranges:
- AC 600V / DC 600V, resolution 1V, accuracy ±(1.5%rdg+3dgt) / ±(1.0%rdg+2dgt)
- Conductor Size: 55mm max.
- Display: 3½ digit (2000 counts).
- Battery Life: Approx. 100 hours (Alkaline).
- Power Source: 9V (6F22) × 1.
- Safety Standards: EN 61010-1 CAT III 600V, EN 61010-2-32, EN 61326-1.

- True RMS measurement for accurate readings.
- 4000-count display for precise measurements.
- Automatic measurement selection (voltage, current, resistance, frequency, capacitance).
- Data hold function to freeze readings.
- Peak function for capturing maximum/minimum values.
- Continuity check and diode testing.
- Low battery indication and auto power-off.
- Flashlight function (auto-off after 1 minute).
- Safety design with shielded banana plugs and recessed input terminals.

- AC Current Ranges:
- 200mA (0~199.9mA) ±(1.5%rdg+2dgt)
- 2A (019.99A), 200A (0~199.9A) ±(2.0%rdg+2dgt)
- 0-500A ±(2.0%rdg+2dgt), 501-1000A ±5.5%rdg
- AC/DC Voltage Ranges:
- AC 200V / AC 600V, resolution 0.1V / 1V, accuracy ±(1.5%rdg+3dgt)
- Conductor Size: 55mm max.
- Display: 3½ digit (2000 counts).
- Battery Life: Approx. 100 hours (Alkaline).
- Power Source: 9V (6F22) × 1.
- Safety Standards: EN 61010-1 CAT III 600V, EN 61010-2-32, EN 61326-1.

- True RMS measurement for accurate readings.
- 4000-count LCD display for precise measurements.
- Automatic measurement selection (voltage, current, resistance, frequency).
- Data hold function to freeze readings.
- Peak function for capturing maximum/minimum values.
- VAHz mode for frequency measurement in ACV and ACA modes.
- Continuity check and diode testing.
- Low battery indication and auto power-off.
- Safety design with shielded banana plugs and recessed input terminals.

- True RMS measurement for accurate readings.
- 4000-count LCD display for precise measurements.
- Automatic measurement selection (voltage, current, resistance).
- Data hold function to freeze readings.
- Peak function for capturing maximum/minimum values.
- VAHz mode for frequency measurement in ACV and ACA modes.
- Continuity check and diode testing.
- Low battery indication and auto power-off.
- Safety design with shielded banana plugs and recessed input terminals.

- True RMS measurement for accurate readings.
- Full auto range for voltage, current, and resistance functions.
- Data hold function to freeze readings in dimly lit or hard-to-reach places.
- Low battery indication.
- Built-in buzzer for continuity test.
- Safety design with no exposed metal parts.
- Shielded banana plugs and recessed input terminals.
- Ohm function ideal for checking continuity of relays, transformers, and motor coils.